2
2. Quick Start Guide
1
Insert Battery
2
Insert Camera
Please fully charge the battery before powering on the gimbal for
the first time.
Please install the camera before powering on the gimbal.
When not in use, turn off the gimbal and then remove the camera.
Remove the bottom cap, insert a 26650 battery and
then replace the cap.
1-Normal Position
1-Normal Position
Option 1
2-Reverse Position
2-Reverse Position
Option 2
To install RX0 camera, please change RX0 camera connection kit.
RX0 Adapter
Plate
1
2
3
Insert RX0 Camera
*RX0 camera connection kit is optional.
* It is suggested to turn on the camera before installation for normal position.
（1）Loose and take down the original fixed plate of the gimbal
（2）Install RX0 adapter plate and tighten the
screw
（3）Insert the set
screw of the camera
from the bottom of RX0 adapter plate
（4）Place the camera and tighten the set screw
Replacement steps
1 2
3
Install the camera on retainer plate,then fix the camera with
retainer bar and screw.
Take the Gopro HERO 5 camera for example.