![background image](http://html1.mh-extra.com/html/feiyu-tech/fy-g4/fy-g4_read-me-first_3905600002.webp)
Upgrade........
PC
Please remove the batteries before upgrading ,
be sure to connect the computer with the USB connector.
!
Firmware upgrade And Parameter Configuration Connection Diagram
The gimbal can execute the operations as follows:
The USB Mini terminal of the cable plug into the function interface , the USB terminal plug
into the USB connector.Please ensure to connect with the USB connector.
Batteries Charging Connection Diagram
Battery Charging
The USB Mini terminal of the USB cable plug into the Micro interface on the charger, and the
USB terminal plug to the power adapter
,
then connect to the EN Connector according to needed .
!
The battery charging must using the method as below
!
If any comments or suggestions please do not hesitate
to e-mail us directly :
FY-G4 is suitable for GoPro 4/GroPro 3+/GroPro 3, also can be compatible
with GoPro LCD backpack and the cameras with the same size
EN
Function
Interface
USB Cable
USB Cable
USB Connector
Charger
Power Adapter
Power Adapter
European Standard
Connector
Please visit the official website of Feiyu Tech: www.feiyu-tech.com to download the USB driver, firmware upgrade software and the
latest firmware then unzip the RAR file.Remove the batteries and refer to the connection diagram to connect the gimbal with the
computer.Please refer to the manual of update operation to upgrading,otherwise the Gimbal will be abnormal.
The heading following speed can be configurate through parameter setting software.User can adjust to the desired following speed
mode according to the requirements of filming scene. Three modes for optional: “SLOW” mode, “NORMAL” mode , “FAST” mode.
Default setting is “NORMAL” mode.
The Gimbal attitude can be calibrate through parameter setting software. User can adjust the pitch and roll in a small angle to achieve
more accuracy filming scene.Please insert the batteries then refer to the connection diagram to connect the gimbal with the computer
for caliration.
Firmware Upgrade Instruction
Parameters Configuration
Gimbal Calibration
Charging Mode
Connection Mode
Attention : Please be sure to connect the computer with the USB connector.
Please visit the official website of Feiyu Tech
to get related information:
www.feiyu-tech.com
Attention : Please be sure to connect the computer with the USB connector.
Attention : Please be sure to connect the computer with the USB connector.