5
7
Horizontal Pivoting
Once the LED Work Light Body (AA) has been attached to the Stand (BB), the LED Work Light can pivot vertically and horizontally into the
desired position.
To pivot horizontally loosen the center Locking Knob then adjust
to your preferred position. Once set to your desired position,
re-tighten the center Locking Knob to lock it into place.
Vertical Pivoting
To pivot vertically, simply adjust the Work Light to your
preferred position. Once set to your desired position,
additional tightening can be done using the Hex Key Allen
Wrench (HH) found on the sides of the work light.
6
Rotate the height adjustment knobs counter-clockwise
to loosen them and pull up the tripod to the desired
height. Rotate the height adjustment clockwise to
secure the tripod in place.
Height Adjustment
Loosen
and raise
Tighten
to secure
Assembly
5
WWW.FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
Locking Knob
Hex Screws
Insert the Handle Locking Knob (II) throught the Y-shape cord
and into the tripod. Turn the Handle Locking Knob (II) clockwise
to hold the Y-Shape cord in place (see Fig. 5).
Fig. 5
Y-Shape cord
II
