WWW.FEIT.COM
6
Pairing the OneSync Fixture to the Remote
Operating with a OneSync remote (AA) allows for expanded control. Modify settings of individual
OneSync fixtures or multiple fixtures by using Groups.
Entering pairing mode
□
Hold down your device’s pairing button for 3 seconds. Once the device
starts to blink slowly, it is in pairing mode. Your device will remain in
pairing mode for three minutes before timing out.
1
Pairing the remote to the fixture
□
While the device is in pairing mode, press and hold the desired
Groups button (1, 2, 3, 4, 5 or 6) for 3 seconds to pair the remote (AA)
to the selected group. The light will flash once and the device will exit
pairing mode.
2
Unpairing the remote from the device
□
To unpair, first follow step 1 so that the device is in pairing mode. Once the device is in pairing mode, on the OneSync remote (AA),
press the pairing group button and hold the power button for 3 seconds.
□
The light will flash once, and the device will exit pairing mode
□
To unpair from all groups at once, hold down button on the OneSync device for 10 seconds. It will flash three times rapidly
to indicate that that all groups have been unpaired from the fixture.
3
NOTE:
The OneSync remote (AA) is compatible with: PATH/SYNC/SOL/BZ, PATH/SYNC/SOL/NK, BOLLARD/SYNC/SOL/BZ,
BOLLARD/SYNC/SOL/NK, SPOT/SYNC/SOL/BZ, SPOT/SYNC/SOL/NK, SPOT/PANEL/SYNC, LAN4SQ/SYNC/SOL/BZ,
LAN4RND/SYNC/SOL/BZ, LAN11SQ/SYNC/BZ, SYNC/PLUG/REM and SYNC/LV/BOX.
NOTE:
The remote comes equipped with a universal Group #1. To create unique groups, pair using Groups #2-6. All
fixtures are pre-paired to the universal Group #1 so that they will immediately respond with any remote Group #1
command. To deactivate this universal group, follow the unpairing instructions in Step 3.
On/Off/Unpair
AA
Select Group
1
2
3
4
5
6
2hr
4hr
8hr
Timer
Reset
Groups
LOW
HIGH
RGB
