5
WWW.FEIT.COM
Operation without Remote
Connecting the Spotlight
□
Connect the spotlight (AA) to the solar panel (CC) by
screwing on the attached extension cable (GG).
1
Turning on the fixture
□
Turn the spotlight (AA) on by pressing the button
on the back of the fixture. The light will turn On
and stay On in the nighttime.
This Onesync fixture works on its own or with remote/smart bridge for grouping and expanded control.
2
Selecting a Color
□
To cycle thru the colors, push the Cycle button.
□
Colors are: Soft White, Bright White, Cool White,
Daylight, Deluxe Daylight, Red, Blue, Green, Yellow,
Orange, Purple, Teal, and Pink.
□
The spotlight (AA) will remember the color setting
when next turned on.
3
Adjusting the Spotlight
To adjust the angle of the spotlight (AA):
□
Loosen the thumbscrew on the spotlight counterclockwise.
□
Manually lift or lower spotlight to desired position.
□
Tighten the thumbscrew clockwise to lock in the
spotlight angle.
4
On/Off/Cycle
&
Pairing Button
NOTE:
Each OneSync Landscape Light can
cycle through five color temperatures and 8
colors (2700K, 3000K, 4000K, 5000K and
6500K-Red, Blue, Green, Yellow, Orange,
Purple, Teal and Pink).
AA
AA
AA
GG
CC
CC
CC
Solar Panel Installation on Roof or Fence
Installing the solar panel on a roof
or fence
□
Place Solar panel (CC) on roof or fence.
Mark the holes using a pencil.
□
Drill through the marking and insert the anchors (FF).
1
Attaching the solar panel
□
Insert provided screw (2) through the hole(s) on the
solar panel (CC) base.
□
Using a Phillips screwdriver, turn screw clockwise.
□
Repeat with other screw on opposite side.
2
