F=Forward, B=Brake, RReverse
The
“
F/B/R
”
mode indicates the vehicle can go forward, backward and brake. This mode
uses “Double
-
click” method to make the vehicle reverse. When moving the throttle stick
from the neutral zone to backward zone for the 1st time, the ESC begins to brake the motor
and the motor slows down and stop, so the backward action is NOT performed
immediately. When the throttle stick is moved to the backward zone again, the backward
action will happen.
The “
F/R
” mode uses “Single
-
click” method to make the vehicle reverse, when mo
ving
the throttle stick from neutral zone to backward zone, the vehicle reverses immediately, so
this mode is usually used for rock crawler.
Beep Meaning
1 Short beep: The battery is NiMH.
2 short beeps: The battery is 2S Lipo.
1 long beep: the ESC is ready to run.
Low Voltage Warning
Low voltage warning feature build in receiver.
If the voltage of battery is lower than 3.3V per series(LiPo) or 5.2V total(NiMH), the ESC
will enter the protection mode, so the motor max speed will be limited to 50%.
If the voltage of battery is lower than 3 V per series(LiPo) or 5V total(NiMH), the car will
stop.