FeinTech
LTL00120 (white) / LTL00121 (black)
LED desk lamp
Conditions of use and safety instructions
70°
40°
120°
150°
Do not cover the lamp or the power supply unit to avoid
damage due to overheating. Do not install near a heat
source!
Avoid wetness and operation in very humid environ-
ments. Condensation after cooling can damage the lamp.
Use only the supplied power supply unit to prevent possi-
ble damage or fire due to overloading.
We recommend unplugging the power supply from the
socket when the light is not in use for a longer period of
time. This will save you maximum energy and increase
safety.
Do not pull on the cable to avoid damage.
The LED bulbs have a very long life and are not replacea-
ble. Therefore, do not open the luminaire.
Only adjust the luminaire carefully and pay attention to
the end stops of the joints. Avoid frequent and rigorous
twisting to prevent damage.
Adjust the lamp so that you are not looking directly into
the bright illuminated surface.
Features:
Luminous flux Ф
use
670 – 700 lm (LED module)
CCT 3000–6500 K
Power consumption 7 kWh / 1000 h
Effective luminous intensity approx. 540 lm
CRI > 80 Ra
Energy efficiency class F (A
G), resp. class E (A
G) at
CCT 4000 K
Lamp lifetime (L
70
B
50
) 30.000 h
Material: aluminium, ABS plastic
Power supply 12 V DC, 450 mA
Dimensions: 48 × 47 × 16.5 cm (base Ø 16.5 cm, lamp
head Ø 14 cm)
All functions are controlled via the practical rotary knob.
Scope of delivery:
Lamp, plug-in power supply unit with connection cable
Operation
Use the 4 swivel joints to adjust the lamp so that the
desired area is optimally illuminated but the light does
not dazzle.
To switch on and off, tap the rotary knob.
To reduce the brightness, turn to the left (-), to increase
the brightness, turn to the right (+).
To adjust the colour temperature from cool white to
warm white, turn the knob while pressing it.
The rotary head has no mechanical end stop.
The last setting remains stored and is used when the
lamp is switched on again. After you have disconnected
the lamp from the mains, it switches on with the factory
setting.
