Fein WSG 14-125 S, Руководство по эксплуатации

Страница: 15 / 82

15
EN
Instruction manual for angle grinder.
Symbols, abbreviations and terms used.
Symbol, character Explanation
Follow the instructions in the adjacent text!
Do not touch the rotating parts of the power tool.
Follow the instructions in the adjacent text!
Be absolutely sure to read the enclosed documentation such as the Instruction Manual and the
General Safety Instructions.
Before commencing this working step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Use eye-protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
An exposed surface is very hot if touched and therefore dangerous.
Confirms the conformity of the power tool with the directives of the European Community.
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environment-friendly recycling.
Product with double or reinforced insulation
Ø
Diameter of a round part
Ø
D
=max. diameter of grinding/cutting disc
Ø
H
=Diameter of mounting hole
T=Thickness of grinding/cutting disc
Ø
D
=max. diameter of backing pad
M=Thread for clamping flange
Weight according to EPTA-Procedure 01/2003
Character Unit of measure, international Unit of measure, national Explanation
n
0
/min rpm No-load speed
P
1
W W Power input
P
2
W W Output
M… mm mm Size of metric thread
L
wA
dB dB Sound power level
L
pA
dB dB Sound pressure level
K… Uncertainty
m/s
2
m/s
2
Acceleration
m, s, kg, A, mm, V, W, Hz, N, °C,
dB, /min, m/s
2
m, s, kg, A, mm, V, W,
Hz, N, °C, dB, rpm, m/s
2
Basic and derived units of
measure from the interna-
tional system of units
SI
.
T
Ø
H
Ø
D
Ø
D
M
3 41 01 088 06 0.book Seite 15 Dienstag, 13. November 2007 3:20 15