WBP10
7. Fitting
C-SC_CSSM
Version 1.0
2015-05-22
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
37
of
39
Fitting the battery
1. Put all the electronic components in place in the housing half as shown in the first photograph.
2. Route all the cables as shown in the first photograph.
3. Fit the cable clamping piece (1) and use the screw (2) to screw it in place [0.7 Nm +0.1 Nm].
4. Fit the second housing half (3).
5. Screw in the two screws 9x22 (4) [1.2 Nm +0.2 Nm].
6. Screw in the screw 4x30 (5) [1.2 Nm +0.2 Nm].
7. Put the switch pushbutton (6) in place and use the countersunk screw (7) to fasten it [0.6 Nm +0.2 Nm].
Tools:
- PH2 cross-tip
screwdriver
7
6
2
1
3
4
5
