16
en
Repair and customer service.
Before mounting or replacing cutting tool or accessories, pull the power plug.
This preventive safety measure rules out the danger of injuries through acci-
dental starting of the power tool.
If required, you can change the following
parts yourself:
–
Clamping jaws
Service.
Renew stickers and warning indications on
the product when aged and worn.
After several hours of operation, the play in
the movable clamping jaw can increase. In
this case, tighten the two screws on the bot-
tom side of the movable clamping jaw so
that the clamping jaw can be easily moved by
hand but does not tilt.
Do not remove the perma-
nent magnets under any cir-
cumstances, as they can cause injuries and
contusions or bruises.
Have your product repaired only through a
qualified repair person and only using origi-
nal replacement parts. This will ensure that
the safety of the product is maintained.
The current spare parts list of this product
can be found on the Internet under
www.fein.com.
Warranty and liability.
The warranty for the product is valid in accordance with the legal regulations in the country
where it is marketed. In addition, FEIN also provides a guarantee in accordance with the
FEIN manufacturer’s warranty declaration.
The delivery scope of your product may include only a part of the accessories described or
shown in this Instruction Manual.
Environmental protection, disposal.
Packaging, worn out products and accessories should be sorted for environment-friendly
recycling.
WARNING
WARNING
