13
en
Assembly instructions.
Filling coolant tank.
Before mounting or replacing application tools or accessories, pull the power
plug.
This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Prevent the flow of liquid along the cable into the socket or into the core drill,
as this can lead to electric shock. Tie a bow in the cable near the plug, so that
any liquid can drip off.
Only use cooling lubricant that is capable of being pumped.
Filling the mounted coolant tank (Fig. 4).
➤
Pull off the upper closing cap of the
coolant tank.
➤
Fill in pump-feedable cooling lubricant.
Do not use oil!
➤
Mount the upper closing cap firmly
onto the coolant tank.
WARNING
WARNING
Fig. 4
Coolant container
Upper closing cap
3 41 01 126 21 0.book Seite 13 Donnerstag, 21. Januar 2010 1:48 13
