FEIN REPAIR TOOLS
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
C-SC_CSSM
2012.05
Check slipping clutch
Tool:
-2-20 Nm torque wrench
-Open-ended spanner 13 mm
-Vice with aluminium
jaws
Clamp slipping clutch in vice with aluminium jaws.
Adjust torque wrench.
The release torque for the slipping clutch must be between 5
– 6.5 Nm.
Use torque wrench to check release torque.
If release torque is higher or lower, replace slipping clutch.
