GX 75
13
EN
Caution! Danger of fire! When grinding metals, red
hot metal and grinding belt particles develop and
are collected in the dust collector.
Before empty-
ing, the contents of the dust collector must have
cooled sufficiently and may be disposed only in
suitable containers.
Pay attention that persons are not harmed by
sparking.
Remove combustible materials in the
direct area. Sparks develop when grinding met-
als.
The workpiece must always lie securely on the
grinding rest and the stop. Workpieces that are
too small or too thin may not be worked.
Danger
of injury from workpieces being thrown from
the machine.
Never touch the running grinding belt.
Dan-
ger of injury.
Press the emergency-off switch immediately in
danger situations.
The machine runs on for up to
50
seconds.
Clean the ventilation slots of the machine regu-
larly. The motor fan draws dust into the housing.
Excessive accumulation of metal dust can cause
electrical dangers.
The mains plug of the machine may be mounted
only by a qualified electrician.
The protective
conductor in the mains socket outlet must be
connected with the protective earthing of the
mains supply.
Pull out the mains plug for maintenance and
repair!
Switching the machine on unintentionally
can lead to serious injuries.
Have the electrical safety of the machine checked
regularly in accordance with statutory regula-
tions.
For machines that have not been checked,
there may be danger of electrical shock!
Check the rotation direction of the motor before
starting the operation of the machine for the first
time.
If the rotation direction of the motor is
incorrect, the workpiece can be thrown from
the machine and cause an accident. The rotation
direction may be changed only by a qualified
electrician.
Make sure that you or other persons are not
standing directly next to the grinding belt when
switching the machine on.
The grinding belt can
tear apart and cause serious injuries.
At a glance.
1 Tension lever, undercarriage
2 Bolt
3 Undercarriage
4 Protective cover, top
5 Belt tension lever
6 Star-knob bolt for protective cover
7 Stop
8 Spark guard wing bolts
9 Spark guard
10 Grinding rest
11 Dust collector
12 Star-knob bolt for grinding rest
13 Adjustment screw for face- grinding rest
14 Star-knob bolt for adjusting the tracking of the
grinding belt
15 Emergency OFF pushbutton
16 Ventilation slots
17 On/Off switch
18 Speed switch (only for 2H models)
19 Contact wheel
20 Face- grinding rest
21 Drive wheel
22 Screw for side cover
23 Side cover
24 Connection sleeve for dust extraction
25 Instruction label
Intended use of the machine.
The machine is intended for stationary sanding/
grinding of metal materials and for use with
radius grinding module GXR or centerless
unit GXC using manufacturer approved grinding
belts.
Mounting instructions.
Assemble the undercarriage as shown.
Place the machine on the floor with the top
side facing down and mount the undercar-
riage according to the figure and instructions on
the DVD.
GX75.book Seite 13 Freitag, 15. Juni 2007 9:43 09
Содержание Grit GX75 Series
