Fein GRIT GI 75 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 32

Fein GRIT GI 75 Скачать руководство пользователя страница 2

GRIT by FEIN

Alle Rechte bei FEIN, insbesondere für den Fall der Schutzrechtanmeldung.
Jede Verfügungsbefugnis wie Kopieren und Weitergabe liegt bei FEIN.

Sahre / MVK 04 / 2009
Hedensted / Grit

GI 75 / GI 75 2H

Specifications

Type GI 75 GI 75 2H

Reference number                                       7 902 01 00 403                            7 902 02 00 403

No - load speed (U/min)                                       3000                                          1500 / 3000
Power input (kW)                                                   4,0                                               2,6 / 3,1
Voltage (Volt)                                                       3 x 400                                           3 x 400
Frequency (Hz)                                                      50                                                   50
Grinding - belt speed (m/s)                                     30                                                 15 / 30
Weight (kg)                                                             65                                                    65
Class of protection                                                   I                                                       I
Belt dimension (width/lenght in mm)                   75 x 2000                                        75 x 2000

«
1
2
3
4
...
»

Содержание GRIT GI 75

































Отзывы:

Нет отзывов