18
en
Working instructions.
Before mounting or replacing cutting tool or accessories, pull the power plug.
This preventive safety measure rules out the danger of injuries through acciden-
tal starting of the power tool.
For each job, use only the GRIT application tool released and intended for the respective
application.
Switching on and off (figure 8).
Check the power supply cable
and the plug for damage.
Always hold the power tool
firmly.
Otherwise, you could
lose control over the power tool.
The
self-start lock
prevents the belt grinder
from automatically restarting again, even after
a brief interruption of the power supply, e. g.,
from a pulled mains plug.
Switching on:
Push the On/Off switch forward
(I)
.
Switching off:
Press the switch downward
(
)
.
Setting the speed (figure 9).
The speed range can be variably adjusted.
Turn the dial control between
“1”
for the
lowest speed and
“6”
for the highest speed.
WARNING
WARNING
CAUTION
On/Off switch
Fig. 8
Thumbwheel for speed adjustment
Fig. 9
5
4
3
2
1
2
1
3
4
5
6
6
