FSC 500 QSL; FSC 1.7; FSC 1.7 Q
7. Fitting
C-SC_CSSM
Version 1.0
2018-04-16
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
20
of
24
Assembling carbon brush (on both sides)
1. Place carbon brush holder (1) on the stator and secure with screw (2) [1.5
±0.1Nm
].
2. Insert carbon brush (3) in correct position in carbon brush holder and fit spring.
3. Connect the carbon brush to stator (4) as shown in the connection diagram.
4. Fit the magnet (5).
Replace the old magnet with a new one during every fitting.
Tools:
- Torx T15
1
2
3
4
4
5
