Fein ABS 12, Руководство пользователя

Страница: 30 / 37

MVK 11 / 02
Alle Rechte bei FEIN, insbesondere für den Fall der Schutzrechtsanmeldung.
Jede Verfügungsbefugnis wie Kopieren und Weitergaberecht liegt bei FEIN
.
7.1. Trouble shooting
FEIN - Repair - Tool
Failure Relief
1. Machine does not start

Check charge condition of battery, if
necessary recharge battery.
Clean the contacts on the machine and battery.
Check electronic actuator.
2. No speed of the actuator

Replace the entire electronic actuator (60) .
(acceleration).
3. Drive shaft continues to turn when the

Replace the electronic actuator (60) .
actuator is released (no brake).
4. Machine runs, drive shaft can be held

Permit speed 1 or 2 to snap in and/or
(no torque) replace the drive motor (50) and/or gear (40) .
5. Strong gear noise, sized.

Replace the entire gear (40) .
6. When using the coupling for screw

Replace the retaining ring (30 ).
action, the adjustment ring turns.
7. Drill chuck does not run round.

0.4 mm beat is permissible measured at a
distance of 25 mm in front of drill chuck end. In
case of excess, replace the striking train (40).
8. Striking impact too weak despite strong

Replace entire gear (40) .
contact pressure.
9. Defective spindle lock.

Change entire gear (40) .
Drill chuck cannot be opened and closed
with one hand.