Feig Electronic OBID i-scan ID ISC.MR200-E Скачать руководство пользователя страница 7

Страница: 7 / 7

OBID i-

scan

Application-Note

ID ISC.MR200-E

FEIG ELECTRONIC GmbH

Page 7 of 7

N40901-0e-ID-B.doc

5. In the following window you can change the settings (IP Address and Subnet Mask). Then press

the button “Save”.

6. The updating process will take a few seconds.

7. After the process has been finished the new TCP/IP address should be displayed.

8. Close the program “Digi Device Discovery” and check the function using the ID ISOStart program

or any other program which support the TCP/IP interface.

Содержание OBID i-scan ID ISC.MR200-E

Страница 1: ...APPLICATION NOTE preliminary public B 2004 09 20 N40901 0e ID B doc OBID i scan ID ISC MR200 E How to change the TCP IP address ...

Страница 3: ...n Note ID ISC MR200 E FEIG ELECTRONIC GmbH Page 3 of 7 N40901 0e ID B doc Content 1 Safety Instructions Warning Read before start up 4 2 Introduction 5 3 Installation of Digi Device Discovery 6 4 Change the TCP IP address 6 ...

Страница 5: ... ID B doc 2 Introduction This description describes how the TCP IP address can be configured on the ID ISC MR200 E reader using the tool Digi Device Discovery dgdiscvr exe Later reader versions will be able to change the TCP IP address by using the demo program ID ISOStart ID ISC MR200 E ...

Страница 7: ... settings IP Address and Subnet Mask Then press the button Save 6 The updating process will take a few seconds 7 After the process has been finished the new TCP IP address should be displayed 8 Close the program Digi Device Discovery and check the function using the ID ISOStart program or any other program which support the TCP IP interface ...