OBID i-scan
®
Montage / Installation
ID ISC.MAT-B
FEIG ELECTRONIC GmbH
Page 4 of 19
M70101-0e-ID-B.doc
1
Safety Instructions / Warning - Read before start-up !
•
The device may only be used for the intended purpose designed by for the manufacturer.
•
The operation manual should be conveniently kept available at all times for each user.
•
Unauthorized changes and the use of spare parts and additional devices which have not been
sold or recommended by the manufacturer may cause fire, electric shocks or injuries. Such
unauthorized measures shall exclude any liability by the manufacturer.
•
The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid
for the device. The manufacturer shall not be held legally responsible for inaccuracies, errors,
or omissions in the manual or automatically set parameters for a device or for an incorrect
application of a device.
•
Repairs may only be executed by the manufacturer.
•
Installation, operation, and maintenance procedures should only be carried out by qualified
personnel.
•
Use of the device and its installation must be in accordance with national legal requirements
and local electrical codes .
•
When working on devices the valid safety regulations must be observed.
•
Note that various parts of the device can become hot.
•
Before touching the circuit board always be sure power is turned off or disconnected. Use a
meter to verify that the device is unpowered. The fact that a power LED is off is not to be used
as an indication that the device is disconnected from the mains or unpowered.
Attention! Voltages of up to 1kV are present on the antenna tuner and antenna
conductor.
Special advice for carriers of cardiac pacemakers:
Although this device doesn't exceed the valid limits for electromagnetic fields you should keep a
minimum distance of 25 cm between the device and your cardiac pacemaker and not stay in an
immediate proximity of the device respective the antenna for some time.
