OBID i-
scan
®
MONTAGE / INSTALLATION
ID ISC.LR2500-A
FEIG ELECTRONIC GmbH
M10611-1de-ID-B
Installation with FCC / IC Approval:
FCC-/IC-NOTICE: To comply with FCC Part 15 Rules in the United States / with IC Radio
Standards in Canada, the system must be professionally installed to ensure compliance
with the Part 15 certification / IC certification. It is the responsibility of the operator and pro-
fessional installer to ensure that only certified systems are deployed in the United States /
Canada. The use of the system in any other combination (such as collocated antennas
transmitting the same information) is expressly forbidden. This device has been designed
to operate with the antennas listed below. Antennas not included in this list are strictly pro-
hibited for use with this device. The required antenna impedance is 50 ohms. An SMA sock-
et is provided on the circuit board for connecting the external antenna.
Article No.
Part No.
3249.000.00
ID ISC.ANT310/310-A HF Antenna
3532.001.00
3533.001.00
ID ISC.ANT1690/600-A Crystal Gate (Base)
ID ISC.ANT1690/600-B Crystal Gate
3459.001.00
3458.000.00
ID ISC.ANT1700/740-A Clear Gate (Base)
ID ISC.ANT1700/740-B Clear Gate
3539.001.00
3362.000.00
ID ISC.ANT1700/740-A Solid Gate (Base)
ID ISC.ANT1700/740-B Solid Gate
Table 1: Antennas with FCC / IC Approval