OBID
®
classic-pro
Montage
ID CPR.02.VP/AB-x
FEIG ELECTRONIC GmbH
Seite 7 von 36
M30800-1de-ID-B.doc
2.1 Montage auf Unterputzdose
1. Montageort auswählen:
Die Montage sollte auf einem möglichst ebenen Untergrund erfolgen.
2. Anschluss:
3. Inbetriebnahme:
•
Anschlussplatine in das Gehäuseunterteil einrasten (siehe: Abbildung 2).
•
Gehäuseoberteil auf Gehäuseunterteil stecken. Dabei die Stiftleiste der Leserelektronik sau-
ber in Buchsenleiste X3 einführen!
•
Funktionskontrolle.
4. Wandmontage:
•
Gehäuseoberteil von –Unterteil abziehen.
•
Gehäuseunterteil mit eingerasteter Anschlussplatine auf Untergrund verschrauben.
•
Gehäuseoberteil auf Gehäuseunterteil stecken. Dabei die Stiftleiste der Leserelektronik sau-
ber in Buchsenleiste X3 einführen!
•
Gehäuseoberteil mit Schneidschraube 3,2 x 25 mm auf Gehäuseunterteil verschrauben.
•
Frontaufkleber auf das saubere und fettfreie Gehäuse aufkleben.
(1)
X3
Abbildung 2: Rückansicht mit eingerasteter Anschlussplatine (1)