IDENTIFICATION
ID PAD74-U
INSTALLATION
Page 11 of 15
•
The antenna is
aligned with the top
(front foil side) facing
up and mounted.
Figure 10: Under table mounting
NOTE:
•
Before mounting, the rubber feet must be removed.
•
Use drilling pattern
•
Drilling holes at locations other than provided in drilling pattern, will destroy the electronics.
•
Make sure that the surface of the tabletop is not damaged.
The length of the screws must be dimensioned according to the table top thickness.
•
The table top must not be made of metal or magnetically materials.
•
If the mounting/table top is too thick (wood, plastic), the reading range is reduced (ideally < 25 mm).
Table 2: Under table mounting
