OBID i-
scan
®
MONTAGE / INSTALLATION
ID ISC.PRH101-B
FEIG ELECTRONIC GmbH
M50802-0de-ID-B.doc
Technische Daten
Technical Data
Gehäuse / housing
Kunststoff ABS / Plastic material ABS
Gewicht / weight
320 g (Ohne Batterien / without batteries)
Schutzart / degree of protection
IP 30
Spannungsversorgung / supply voltage
4 aufladbare Batterien (Akkumulatoren) /
4 recharchable Batteries
Schnittstelle / interface
Bluetooth, SSP (serial port profile)
Leistungsaufnahme / power consumption
max. 2,5 W
Temperaturbereich / temperature range
•
Betrieb / operation
•
Lagerung / storage
0°C ... +50°C
-20°C ... +70°C
relative Luftfeuchte / relative air humidity
95 % (nicht betauend / non-condensing)
Antenne / antenna
intern / integrated
Betriebsfrequenz / operating frequency
13,56 MHz
RF-Sendeleistung / RF- transmitting power
500 mW
±
2 dB
Unterstützte Transponder / supported transponders
- ISO 15693 kompatibel
- I
•
Code 1
- optional I
•
Code EPC , I
•
Code UID
Die Funkanlage entspricht, bei bestimmungsgemä-
ßer Verwendung den grundlegenden Anforderungen
des Artikels 3 und den übrigen einschlägigen Be-
stimmungen der R&TTE Richtlinie 1999/5/EG vom
März 99.
Equipment Classification gemäß
ETSI EN 300 330 und ETSI EN 301 489: Class 2
When properly used this radio equipment conforms
to the essential requirements of Article 3 and the
other relevant provisions of the R&TTE Directive
1999/5/EC of March 99.
Equipment Classification according to
ETSI EN 300 330 and ETSI EN 301 489: Class 2
FCC ID PJMPRH101
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired op-
eration.
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user´s authority to operate the equipment.
