Feig Electronic ID ISC.LRM1002-E, Руководство по интеграции

Страница: 16 / 23

Identification Integration Manual ID ISC.LRM1002-E
FEIG ELECTRONIC GmbH Page 16 from 23 M21110-3e-ID-B.docx
3.4.2 USB
– Interface X11 (Host Communication)
The USB socket on the board is terminal X11. The data rate is reduced to 12 Mbit (USB full
speed). A standard USB-cable can be used.
The Figure 16 and table shows the connection of connector X11 (5pol.)
type “JST PH” RM 2 mm
(vertical).
X2
Pin-No.
1 Shielding USB cable - shielding
2 GND
3 USB-D PLUS
4 USB-D MINUS
5
VCC + 5 V DC

5 %
Optional the following USB cable can be ordered:
3541.000.00 ID CAB.USB-B Cable for Interface USB/JST PH
Note:
The length of the USB-cable can be a max. of 5m (200 inch). It is not allowed to use longer
cables.
Figure 15: USB-Interface for host communication
Figure 16
: Connector „JST PH“