NOTICE:
The generator has been shipped without engine oil. Do not start the engine till fill with the
sufficient engine oil.
Do not tilt the generator when adding engine oil. This could result in overfilling and damage to
the engine.
TIP:
The generator can be used with the rated output load at standard atmospheric conditions.
“Standard atmospheric conditions”
Ambient temperature25
℃
Barometric pressure100kPa
Relative humidity 30%
The output of the generator varies due to change temperature, altitude (lower air pressure at
higher altitude) and humidity.
The output of the generator is reduced when the temperature, the humidity and the altitude are
higher than standard atmospheric conditions.
Additionally, the load must be reduced when using in a confined areas, as generator cooling is
affected.
Starting the engine
1. Turn the engine switch to
“
ON
”①
.
2. Pull the choke out
②
.
3. Turn the Fuel switch knob to
“
ON
”④
TIP
: The choke is not required to start a warm engine.Push the choke in.
4. Pull slowly on the recoil starter until it is engaged, then pull it briskly.
TIP
:Grasp the carrying handle firmly to prevent the generator from falling over when pulling the
recoil starter.
13