21
Fig.
33-3 The switch rocker arm is fully closed
●
Note: When using this function, please turn off the machine.
●
Note: When fully closed, check that the rear panel bezel
securely locks the rear cover.
●
Note: When fully closed, please check if the switch rocker arm
has been closed by the rear cover
●
Note: It is strictly forbidden to remove the auxiliary hose when
the machine is working.
2.
Attach the auxiliary hose tail connector to the rear cover hose
connector. (See Fig 34-1, 2)
Fig.
34-1 Open the cover
Fig.
34-2 Fixed interface
3.
Start the machine
，
Point the hose mouth at the trash
。
（
see fig 35
）
Fig.
35 Using a hose
6
）
-3. Auxiliary hose use precautions.
1. Please understand in detail the operation according to the "Precautions for the working area of the whole machine (pages 14-15)" and the
following precautions.
●
Note: Please understand the parameters of the auxiliary hose in “Accessory Parameters (page 14)” before use.
●
Note: When working, try to straighten the hose and work it to ensure maximum suction and wind speed.
●
Note: It is strictly forbidden to point the hose to others or any non-working area during work.
●
Note: It is strictly forbidden to load and unload the hose interface when the machine is started.
。
●
Note: Do not pull the hose to move the machine forward or backward.
●
Note: Do not align the hose head with liquids, fire, and hazardous gases.
●
Note: Do not pick up the trash that is larger than the hose port.
●
Note: When the hose is clogged, stop the machine and then maintain it.
●
Note: Keep the hose away from the engine silencer.
