11
g. Starting and stopping the operation
-
Push the forward/reverse switch at the desired position (on the left for reverse
position and on the right for the forward position).
-
Push the trigger switch to start the operation.
-
To control the speed, push lightly the trigger switch to start the operation at a low
speed. Increasing the pressure on the trigger switch to increase the speed.
-
To change the position, release the trigger switch. Put the reverse/forward switch in
the center position (never change directly the position). Push the forward/reverse
switch to change the position. Push the trigger switch to restart the operation.
-
To stop the operation, release the trigger switch. Then put the forward/reverse switch
to the center position.
4. MAINTENANCE AND STORAGE
a. Maintenance
-
Clean the housing only with a damp cloth. Do not use solvents! Then wipe thoroughly.
-
Check the condition of the tool. If the tool is damaged or has malfunction, do not use it
and bring it to a qualified service for inspection or reparation.
-
To maintain the optimum battery power, we recommend that the battery be
discharged and recharged every two months.
b. Storage
Remove the battery from the tool.
Store the tool in a dry place and protected from freezing, the ambient temperature should
not exceed 50◦c. Put it out of the reach of children.
5. DISPOSAL
Electric power tools, as well as their accessories and packaging, must each be able
to follow an appropriate recycling pathway. Only for the countries of the European
Union:
Do not throw away your electrical appliance with the household waste! In
accordance with the European Directive 2012/19/EU on waste electrical and
electronic equipment and its implementation in national laws, power tools that can no longer
be used must be separated and follow an appropriate recycling pathway.
