Feider Machines FTDT461ZT Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 22

Feider Machines FTDT461ZT Скачать руководство пользователя страница 13

13

Filling oil tank

- Open the oil tank.

- Fill directly the oil in the tank. Do not overfill.

- Close the oil tank. Wipe any spillage.

Checking the oil level

- Check the oil level when the engine is off and horizontal.

- Remove the plug / dipstick from the oil tank and wipe it off.

- Insert the oil tank plug / dipstick into the tank neck as shown, without

screwing it in, and then remove it to check the oil level.

- If the oil level is near or below the lower limit of the dipstick, remove the

dipstick and fill the recommended oil reservoir up to the upper limit of

the dipstick (bottom edge of the dipstick). Do not overfill.

- Replace the oil tank plug / dipstick.

Upper limit :

height limit

Lower limit :

low limit

OPERATION

Start the device on a safe and flat ground, preferably not in tall grass. Make

sure that the cutting tools do not touch objects or the ground.

a. Start the engine

- Push 3 times the primer bulb.

- Pull the drive lever bar the operation control bar (control lever) in the

direction of the handle and hold it.

- Pull the starter rope.

- If the engine starts, pull back slowly the starter rope.

«
...
11
12
13
14
15
...
»

Содержание FTDT461ZT























Отзывы:

Нет отзывов