ORIGINAL INSTRUCTIONS >EN
9
2) Route the power cord along a safe route to reach the work area without creating a tripping hazard or
exposing the power cord to possible damage. The power cord must reach the work area with enough
extra length to allow free movement while working.
3) Secure loose work pieces using a vise or clamps (not included) to prevent movement while working.
4)
There must not be objects, such as utility lines, nearby that will present a hazard while working.
4.4 General Operating Instructions
1) Make sure that the Trigger is in the off-position, and then plug in the tool.
2) Place the screw on the end of the bit.
3) Place the tip of the screw where it will be driven.
4) Apply pressure to the Bit to drive the screw into place, pulling back as soon as the clutch engages.
5)
To prevent accidents, turn off the tool and unplug it after use. Clean, and then store the tool indoors out
of children’s reach.
5. MAINTENANCE AND SERVICING
Procedures not specifically explained in this manual must be performed only by a qualified
technician
.
WARNING !
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Trigger is in
the off-position and unplug the tool from its electrical outlet before performing any procedure in this
section.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected
before further use.
1)
BEFORE EACH USE,
inspect the general condition of the tool. Check for: loose hardware,
a. Misalignment or binding of moving parts,
b. Damaged cord/electrical wiring,
c. Cracked or broken parts, and any other condition that may affect its safe operation.
2)
AFTER USE,
wipe external surfaces of the tool with clean cloth.
3) With the Drywall Screwdriver running, blow dirt and dust out of all air vents of the tool with dry air. Also,
remove the Depth Collar and blow drywall dust out of the Clutch Housing.
WARNING! If the supply cord of this power tool is damaged, it must be replaced by a specially
prepared supply cord available through the service organization