NOTE:
Do not allow rotating abrasive pad to contact sharp protrusions. Contact with protruding objects
(nails, screws, electrical boxes, etc,), can severely damage the abrasive pad
.
MAINTENANCE
Keep tools clean, clean up debris and dust.
Often add in lubricating oil and grease (reducer, bearing) to keep the tool flexible operation.
Always check the power cable, plug, switch, so that the tools in good condition.
Power tools produced by the company are quality inspection Strict, if the machine is still failure occurs;
please repair the machine to the authorization of the customer service department.
CARBON BRUSH REPLACEMENT
You must replace both carbon brushes if the original Carbon brush wear limit. Use "-" screwdriver
counter clock wise unscrew the brush cover, remove the original carbon brush, to put new carbon brush
to brush holder and screw on the brush cover.
a. Spare parts
You can order the spare parts directly from our Service Center. Please place your order according to the
type of the machine and the parts number given in the explosion drawing.
b. Repairs
There are no repairs to be provided by the user. For inspection and repairs, bring the tool directly to a
qualified service.
If it is necessary to replace the cable, it shall be done by an authorized agent.
c. Storage
After use and cleaning, please store your tool. Use the provided transport bag to transport the tool and
the accessories. Store the tool in a clean, dry place, preferably in its box.
The tool must be stored away from children and pets.
