Feider Machines FNHPT240, Инструкция по эксплуатации

Страница: 18 / 26

MAINTENANCE
18
Oil Drain Plug
MAINTENANCE
Regular maintenance will extend the life of this pressure washer and improve its performance. The warranty does
not cover items that result from operator negligence, misuse, or abuse. Toreceive full value from the warranty,
operator must maintain the pressure washer as instructed in this manual, including proper storage.
After Each Use
Follow the following procedure after each use:
• Shut off engine and turn off water supply. Release water pressure by pointing spray gun in a safe
direction and squeezing the trigger.
• Disconnect high pressure hose, spray gun, and nozzle. Drain water from items and use a rag to wipe down the
outside of the hose and spray gun.
• Empty the water from the pump by pulling the recoil starter 6 times.
• Store unit in a clean and dry area.
Maintenance Schedule
After First 5 Hours Change Engine Oil
After Each Use Check and Clean Water Inlet screen
Check High Pressure Hose
Check and Clean Detergent Siphoning Tube
Check Spray Gun for Leaks
Clean Debris
Check Engine Oil Level before starting
Annually (20 hr. Use) Change Engine Oil (Service more often under dirty or dusty conditions)
Annually (50 hr. Use) Check and Clean Air Filter
Annually (100 hr. Use) Service or Replace Spark Plug
Changing Engine Oil
Engine oil will drain better if the engine is still warm, but not hot.
• Shut off engine.
• Clean the area around the oil fill cap/dipstick to keep out debris then remove oil fill cap/dipstick.
• Place an oil pan on the ground to catch oil.
• Once oil is completely drained, return the pressure washer to a level position. Refill the engine with new oil as
instructed earlier in this manual
WARNING!
Before inspecting or servicing this machine, make sure the engine is off and no partsare
moving. Disconnect the spark plug wire and move it away from the sparkplug.