Clean the shank end of the adapter shank and apply a light coat of grease.
Insert the universal bit holder with a turning motion into the tool holder until it automatically locks.
Check the locking effect by pulling the universal bit holder.
Insert a screwdriver bit into the universal bit holder. Use only screwdriver bits that match the screw head.
To remove the universal bit holder, pull the locking sleeve 6 toward the rear and remove the universal bit holder 15 out
of the tool holder.
Maintenance and cleaning
Before any work on the power tool itself, pull the mains plug.
For safe and proper working, always keep the power tolls and the ventilation slots clean.
A damaged dust protection cap should be changed immediately. We recommend having this carried out by after-sales
service.
If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its
service agent.
Others maintenance and inspection shall be provided by a service agent.
