GB
19
Fig.11
MAINTENANCE
Replacing hydraulic oil (fig.12)
Replace the hydraulic oil in the log splitter after every 150 hours of use. Take
following steps to replace it.
1.
Make sure all moving parts stops and the log splitter is unplugged.
2.
Unscrew oil drain bolt
(14 ) (fig.6)
with dipstick to remove it.
3.
Turn the log splitter on the support leg side over a 3.3
liter capacity container
to drain the hydraulic oil off.
4.
Turn the log splitter on the motor side.
5.
Refill fresh hydraulic oil at the volume as per the hydraulic oil capacity of a
particular model indicated in the specifications table.
6.
Clean the surface of Dipstick on the oil drain bolt and put it back into the oil
tank while keep the log splitter vertically.
7.
Make sure the level of the refilled oil is just between 2 grooves around the
dipstick.
8.
Clean the oil drain bolt before thread them back. Make sure they are tightened
to avoid leakage before placing the log splitter horizontally.
