tree trunk.
Before bending a branch or trunk in bending, observe the direction of bending and finish the cut
opposite the bending side to prevent the chain guide from getting stuck in the cut.
a. Felling of trees
Examine the work area and estimate where the tree will fall. Start the machine as described above.
Start by making a notch in the direction of fall chosen.
When the tree falls, shout or make a beep to alert people in the vicinity. When the shaft falls, move
away from the cutting area.
b. Trunk on the ground
Cut half of the trunk, turn it over and finish the cut on the other side.
c. Trunk in elevation
Begin by cutting a first part from below and then from above. Then, on the second part, repeat this
operation.
f. Pruning of a felled tree
Observe first the direction of flexion of the branch. Make a first notch on the side in flexion and
finish the cut on the opposite side.
g. Pruning a tree
Begin pruning by nicking the tree from below and then finish at the top.
17
