PROBLEM
CAUSE
REMEDY
Fan doesn’t work
1.No electricity
2.Blade stalled by hosing
1.Check power supply
2.Repair/replace housing
Piezo will not ignite
1.Ignition cable damage
2.Ignition cable disconnected
3.Distance between electrode and
burner is too high
1.Only by a qualified person
2.Only by a qualified person
3.Adjust distance within 3-8 mm
No gas
1.Gas cylinder is empty
2.Gas valve on cylinder closed
3.Gas valve of heater not open
1.Replace new gas cylinder
2.Open the valve
3.Attempt re-light sequence correctly
Flame goes out while
heater running
1.Thermo-element was not heated enough
2.Safety thermostat activated
3.Restricted air flow
1.Repeat ignition process and keep safety
gas valve depressed for a minimum of 30
seconds, then release slowly
2.Allow the heater to cool down for at
least 10 minutes. Check thermostat and
then attempt re-light sequence correctly
3.Check heater inlet and outlet, remove
any obstructions
TROUBLESHOOTING
DISPOSAL
- At the end of the machines’ working life, of when it can no longer be repaired, ensure that it is disposed of
according to national regulations
- Contact your local authority for details of collection Schemes in your area.
In all circumstance:
·
Do not dispose of power tools with domestic waste.
·
Do not incinerate.
·
Do not abandon in the environment.
·
Do not dispose of WEEE*
As unsorted municipal waste.
·
Waste Electrical & Electronic Equipment.
