sure it does not fall over).
7. To prevent tripping, remove any obstacles on the site.
8. The operator is responsible to third persons in the work area.
9. Do not operate the mixer unattended.
10. Do not let children near the mixer.
11.
Mixer to be only used for works given in paragraph “Use as designated“.
12. Do not modify the machine or any of its parts.
13. The mixer can only be put into operation with complete and intact safety
equipment.
14. Check the moving parts for perfect functioning, if working smoothly and if no
parts are damaged. To provide safe operation of the equipment, all parts
must be installed properly and meet all conditions.
15. Damaged protective equipment and parts must be professionally repaired or
replaced by a recognized professional workshop, unless otherwise specified
in the Operating Instructions.
16. Defective or damaged parts of the machine to be immediately replaced. Any
damaged or illegible safety stickers must be replaced.
17. Original spare parts to be used only. Using other spare parts can result in
accidents/injuries of the user. The manufacturer will not be liable for any
such damage.
18. Check regularly this machine. Check all bolts, nuts, and screws for tightness
before each use, especially those securing guards and drive mechanisms.
Vibration during mixing may cause these to loosen.
19. Form a habit of checking to see that all the adjusting tools, shovels, hand
towels and other tools/equipment are removed from mixer area before
turning it on.
20. Replace damaged, missing or failed parts before using it. Warning labels
carry important information. Replace any missing or damaged warning
labels.
21. The tool shall be supervised when switched off and put out of children and
animals, in order to avoid risks.
22. The machinery shall not be operating when it is being moved.
23. The mixer shall be positioned on level ground.
24. Do not to reach into the drum interior to the rotating blades.
25. Warning - use only the original standard of insulation material for repair and
to maintain insulation distances.
26. Disconnect the mixer from power supply before opening the enclosure and
do not to operate it unless the enclosure is fully closed.
4