10.
DO NOT USE IN DANGEROUS ENVIRONMENTS.
DO NOT use machinery in damp,
wet locations, or where any flammable or noxious fumes may exist.
11.
KEEP WORK AREA CLEAN AND WELL LIT.
Clutter and dark shadows may cause
accidents.
12.
TURN OFF THE MACHINE BEFORE REPAIRING THE TOOL.
13.
MAINTAIN MACHINERY WITH CARE.
Keep blades sharp and clean for best and
safest performance. Follow instructions for lubricating and changing accessories.
14.
MAKE SURE GUARDS ARE IN PLACE AND WORK CORRECTLY BEFORE
USING MACHINERY.
15.
REMOVE ADJUSTING KEYS AND WRENCHES.
Make a habit of checking for keys
and adjusting wrenches before turning machinery
ON
.
16.
CHECK FOR DAMAGED PARTS BEFORE USING MACHINERY.
Check for binding
and alignment of parts, broken parts, part mounting, loose bolts, and any other
conditions that may affect machine operation. Repair or replace damaged parts.
17.
USE RECOMMENDED ACCESSORIES.
Refer to the instruction manual for
recommended accessories. The use of improper accessories may cause risk of
injury.
18.
DO NOT FORCE MACHINERY.
Work at the speed for which the machine or
accessory was designed.
19.
SECURE WORKPIECE.
Use clamps or a vise to hold the workpiece when practical.
A secured workpiece protects your hands and frees both hands to operate the
machine.
20.
DO NOT OVERREACH.
Keep proper footing and balance at all times.
21.
MANY MACHINES WILL EJECT THE WORKPIECE TOWARD THE OPERATOR.
Know and avoid conditions that cause the workpiece to "kickback."
22.
ALWAYS LOCK MOBILE BASES (IF USED) BEFORE OPERATING MACHINERY
.
23.
BE AWARE THAT CERTAIN WOODS MAY CAUSE AN ALLERGIC REACTION.
In
people and animals, especially when exposed to fine dust. Make sure you know what
type of wood dust you will be exposed to and always wear an approved respirator.
24.
HAND SAFETY:
DO NOT put hands or other body parts into hopper, funnel, or outlet
while the blades are turning. The chipper/shredder can drag you into the blade,
causing amputation of fingers, hands or other body parts. DO NOT touch the exhaust
during or immediately after operation to prevent burns.
25.
OPERATING LOCATION:
Set up the chipper/shredder on firm, level, grass or dirt.
DO NOT set up the chipper/shredder on gravel, asphalt, concrete, or stone. The
chips are expelled from the machine with enough force to ricochet off of hard
surfaces and cause serious injury. DO NOT set up the chipper/shredder in a location
where sparks or heat from the motor could cause a fire.
26.
SECURE FOOTING:
Placing the chipper/shredder on a slope or slippery surface may
cause the operator to fall into the machine, causing burns from the motor, or an
amputation if an arm accidentally goes into the hopper. Wear non-slip, closed toed
shoes or boots to maintain secure footing.
