background image

 

 

1. SAFETY INSTRUCTIONS                                                 

1.1 GENERAL POWER TOOL SAFETY WARNINGS 

WARNING:  Read  all  safety  warnings,  instructions,  illustrations  and  specifications  provided 

with this power tool. 

Failure to follow all instructions listed below may result in electric shock, fire and/or 

serious injury

Save all warnings and instructions for future reference. 

The  term  "power  tool"  in  the  warnings  refers  to  your  mains-operated  (corded)  power  tool  or 

battery-operated (cordless) power tool. 

1) 

Work area safety 

a) Keep work area clean and well lit

Cluttered or dark areas invite accidents. 

b)  Do not operate power tools in explosive atmospheres, such as in the presence of flammable 

liquids, gases or dust. 

Power tools create sparks which may ignite the dust or fumes. 

c) Keep children and bystanders away while operating a power tool. 

Distractions can cause you to 

lose control. 

2) 

Electrical safety 

a) Power  tool  plugs  must  match  the  outlet.  Never  modify  the  plug  in  any way.  Do  not  use  any 

adapter plugs  with  earthed  (grounded)  power  tools. 

Unmodified  plugs  and  matching  outlets  will 

reduce risk of electric shock. 

b)  Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and 

refrigerators. 

There is an increased risk of electric shock if your body is earthed or grounded. 

c) Do not expose power tools to rain or wet conditions. 

Water entering a power tool will increase the 

risk of electric shock. 

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. 

Keep cord away from heat, oil, sharp edges or moving parts. 

Damaged or entangled cords increase 

the risk of electric shock. 

e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. 

Use of 

a cord suitable for outdoor use reduces the risk of electric shock. 

f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) 

protected supply. 

Use of an RCD reduces the risk of electric shock. 

3) 

Personal safety 

a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do 

not use a power tool while you are tired or under the influence of drugs, alcohol or medication. 

moment of inattention while operating power tools may result in serious personal injury. 

b) Use personal protective equipment. Always wear eye protection. 

Protective equipment such as a 

dust  mask,  non-skid  safety  shoes,  hard  hat  or  hearing  protection  used  for  appropriate  conditions  will 

reduce personal injuries. 

c) Prevent  unintentional  starting.  Ensure  the  switch  is  in  the  off-position  before  connecting  to 

power source and/or battery pack, picking up or carrying the tool. 

Carrying power tools with your 

finger on the switch or energising power tools that have the switch on invites accidents. 

d)  Remove any adjusting key or wrench before turning the power tool on. 

A wrench or a key left 

attached to a rotating part of the power tool may result in personal injury. 

e)  Do not  overreach.  Keep  proper  footing  and balance  at  all  times. 

This  enables  better  control  of 

the power tool in unexpected situations. 

f) Dress  properly.  Do  not  wear  loose  clothing  or  jewellery.  Keep  your  hair  and  clothing  away 

from moving parts. 

Loose clothes, jewellery or long hair can be caught in moving parts. 

g) If  devices  are provided  for the connection of dust  extraction and collection facilities,  ensure 

3

Содержание F2000TM-A

















Отзывы: