Gramsham 2 · D-84550 Feichten/Alz
Phone +49- 86 23 - 70 35 · Fax +49-86 23 - 70 36
[email protected]
www.feichtner-maschinenbau.de
Operation Manual Universal Gluing Press “RP-3000”
Release 10/2017 - We reserve the right to make technical changes in the interests of further development
9
Set up / Operation
Make sure that the hydraulic pumps are fully retracted. Now adjust the pad shoes in such a way that
the finished wooden board or frame still receives sufficient pressure (observe the max. way of the
hydraulic pumps!). If necessary, the hydraulic pumps can also be adjusted in their position. For this
purpose, the screw handles are released, the hydraulic pumps are moved upwards or downwards and
the screw handles are tightened again.
Pull up the pad shoe to release the locking pin.
The pad shoe can now be moved freely.
Then release the pad shoe just before the desired
position and push it until the bolt snaps back into place.
Loosen the screw handle,
move the hydraulic pump,
tighten the screw handle
