F E I B A O F - 9 F P A N T H E R
6
6
6
6
1. Remove the servo cover from the rudder servo bay. Keep the orientation of
the servo cover correct, do not flip or rotate the servo covers, as there may
be slight variations in the screw holes and they may not fit perfectly if you
rotate the covers.
Figure 1
2. Fit the supplied aluminum mounts to the servo, using the supplied screws.
Do not over tighten and strip the screws. Do not use any grommets or other
servo hardware. Secure the screws with Locktite
Figure 2
3. Check the depth of the servo mount with the servo. Relieve if needed with a
sharp exacto knife.
Figure 3
