Fehom PDGT701BE, Руководство пользователя

Страница: 8 / 22

When water tank is full, the PUMP will automatically start pumping water, and
the indicator light will flash.
When the water level in the water tank is too low, the PUMP will automatically
stop pumping water, and the indicator light goes out.
In the power-on state, long press the "PUMP” button for 3 seconds, the
PUMP function is forced to open, the indicator PUMP will flash.
In the power on or standby state, press the "Timer" button once to enter the
timer setting state: Timing indicator light up and the digital number " " flashes
to show the time.
In the timing setting state, press the "Up" or "Down" button to set the desired
time (setting range: 01-24h, can be cycled).
Press the button once again or no button operation for a few seconds, the
timing setting state will automatically be exited.
If the time is set to be 00, the time setting is invalid.
The humidity level can be set within a range of 10%RH to 98%RH in 1%
increments.
When it starts work, it will first automatically detect and show the room's
humidity. Press the "UP" button to change the humidity selection in 1%
increments.Press "DOWN" to make it decrease by 1%RH. " " Flash and
show the setting humidity.
When the humidity level is set at 30%RH, the dehumidifier will work at
continuous dehumidifying mode.
Press the "function" button once or no button operation for a few seconds will
automatically exit the humidity setting state.