Feena Electronics FMDJ9303, Руководство пользователя

Страница: 7 / 12

Software Installation
MIDI Tweaker
The MIDI Tweaker is an application that allows you to change the
MIDI assignments of each knob, fader, button and joystick on the
9303. Please visit
www.feena-electronics.com for the latest
version and manual of the MIDI Tweaker application.
General
After the FMDJ9303 has been found by your operating system the
rest of the setup is reliant on the DJ software you are using.
Somewhere in your DJ software setup utility you should be able to
assign the 9303 as the MIDI device to accept MIDI controls from. It
will be called “USB Audio Device” in Windows XP. Please visit our
website for detailed instructions on how to set up your 9303 with the
most popular DJ software.
Firmware Updates
NOTE: Only a PC version of the firmware update application is
currently available. The MAC version will be available soon.
Feena has made it very convenient to update firmware for the 9303 if
necessary. If you require a firmware update visit our website at
www.feena-electronics.com and click on the support link. Within the
support section select the 9303. Find the link to the latest firmware
release and download the .exe file. Once you have copied the
executable to your local machine follow these steps.
1. Make sure the 9303 is NOT plugged into your computer yet.
2. Double click on the FMDJ9303FirmwareUpdateVX.exe that you
just downloaded. This will install a driver for the 9303 firmware
upgradeable device.
3. Hold down the two headphone CUE buttons on the 9303. and
plug in the 9303 to a free USB port. (The button lights should
not come on.)
4. Press “Start” on the FMDJ9303FirmwareUpdate application.
5. Wait until the application completes.
6. Unplug the 9303 from the USB port then plug it back in again.
7. Your firmware is now updated.