7
2.3 Manual channel scan and setting:
Confirm that the transmitter has entered a normal working
condition.
Press “
” to turn on the monitor, press “
” to select
“RF
” signal.
Press “
”button
，
“
BAND:X CH:X
” will display on the top
left corner of the screen; press“
”button to switch
BAND A/B/E/F
channels, and then press “
” button to
select 1~8 channels. If the transmitter has worked, receiver
and transmitter frequency in agreement, the receiver will
receive the signal sent from the transmitter and displayed on
the monitor
Note: The effect of receiving the distance has a great
relationship with the reception power of the transmitter and
the receiver venues. If the reception is poor, the antenna can
be replaced with three leaves, four leaf antenna or panel
antenna. Replace the antenna should pay attention to the
antenna and receiving the same frequency.
