FeelElec FY8300S Series, Руководство пользователя

Страница: 10 / 52

FeelElec
8 FY8300S Series User
’
s Manual
—
Can sweep Sine, Square, Arbitrary and so on.
—
Can sweep frequency, amplitude, offset and phase.
—
2 sweep types: Linear, Logarithm.
—
VCO voltage controls parameters of signal output
available (for example: voltage controlled oscillator).
—
Auxiliary functions and system configuration setting.
—
Can save 12 sets waveform parameters including
frequency, amplitude, offset, phase and so on.
—
System Language has English and Chinese for
user
’
s option.
—
Buzzer can be turned on/off in this manu.
—
Set multimachine uplink.
—
Switch Master-Slave status
—
Set default status of three channels at start-up.
—
Trigger and modulation function button
—
Set definite amount of pulse string to output.
—
Set modulation mode: ASK, FSK, PSK
—
VCO function can be set
—
Frequency, Amplitude, Bias and Duty of
VCO Voltage Control Signal Generator
—
Output function of various parameters such as VCO
.
4
Arrows
Press Arrow buttons to select figure which you want to
edit when setting values of each parameter.
5 ADJ Knob
—
Rotate the ADJ Knob to increase or reduce the current value
indicated by the cursor.
—
Frequency unit can be changed by Press ADJ Knob under
Frequency value setting status.
—
Press ADJ Knob to Start/Stop sweep under Sweep interface.
Press the knob as confirmation (OK button).
6
Power
Button
The power indicator keeps illuminating when power on.
Press the power button and the indicator change to notifylight status
and the signal output terminates.
7
CH1 channel
output
connector
CH1 connector, output impedance is 50
Ω
.
When CH1 channel activates (indicator illuminates), CH1 outputs
signal with parameters set.
8
Output
Channels
Control CH1 output. Press it to switch to CH1 parameter
setting interface.
—
Press it to turn on CH1 output with current
configuration. The indicator will illuminate.
—
Press it again to turn off CH1 output and the indicator
will extinguish.