Assembling:
1. Assemble the appliance and accessory parts depending on the surface you want to vacuum clean (Fig. 1 - 8).
2. Ensure that the bypass vent is shut (Fig. 5).
3. If you use the telescopic tube (Fig. 6), adjust its length (Fig. 7).
4. If you use the floor nozzle (Fig. 8), set it to the floor to be cleaned (Fig. 9 hard floor, Fig. 10 carpet).
USE:
1.Pull the cable out of the appliance (Fig. 11) and plug into a socket.
WARNINg:
Danger of electric shock! If the
red marking shows (Fig. 12) retract the cord
by pressing the retraction button to pull in
the cord up to the yellow mark (Fig. 13) again.
Otherwise, the power cord may be damaged.
2. Switch on the appliance using the on/off
switch (Fig. 14).
NOTE:
The auxiliary air regulator (Fig. 5) must be completely closed for vacuum cleaning. With the auxiliary air regulator you can quickly
reduce the suction power, to release objects (such as curtains) that have been sucked in.
3. Vacuum clean (Fig. 15).
Cleaning and maintenance
The dust container has to be emptied and cleaned regularly. Otherwise emptying it will get harder and harder or smells and bacteria might
develop, depending on what you have vacuumed up. Therefore, it is best to empty the dust container after each vacuuming session.
Empty and clean the dust container at the latest when the cleaning/ emptying display lights up (Fig. 16).
ATTENTION!
- Never clean the appliance connected to
mains. Before cleaning disconnect the device
and wait for full stop of moving parts.
- Never submerge motor unit, its mains cable
and plug in water or other liquid.
1. Switch off the appliance, pull the plug out of
the plug socket.
2. Remove the dust container (Fig. 17), empty
the dust container (Fig. 18).
3. Take this opportunity to also check the filter
elements (dual motor protection filter and
cyclone unit) in the dust container (Figures
19 - 22). Remove all residual dust adhering to
the dust container. Use only a dry cloth to do
this, or, if necessary, a brush with soft bristles
(Fig. 23).
4. If the dual motor protection filter is dirty,
clean it under cold or lukewarm running water
(Fig. 24) until all dirt is gone.
CAUTION:
The dual motor protection filter is washable, but it may not be cleaned in dishwashers or washing machines. Also, do not
use detergents or brushes with hard bristles. Let the filter elements of the dual motor protection filter dry (for approx.24 hours at room
temperature, Fig. 25) after wet cleaning.
5. Put the filter elements back in (Fig. 26 - 29).
NOTE:
The filter elements are constructed so that they will only go all the way down if in the right position. Nevertheless, it is helpful if you
align the cyclone unit to the dust container as shown in Fig. 28 before insertion. Do not use force upon insertion. If the dust container lid (Fig.
29) will not shut properly, then you have to take the parts out again and put them back in.
CAUTION:
Never operate the appliance without the filter elements in place. Never operate the appliance with damaged filter elements.
6. Re-insert the dust container (fig. 30). You should feel and hear it click into place.
Storage
- Before storage disconnect the device and wait for full stop of moving parts. Clean the appliance before storage.
- Store the device in a cool, dry and clean place beyond the assess of children and people with limited physical and mental abilities.
Environmental protection
Old appliances contain valuable materials that can be recycled. Please arrange for the proper recycling of old appliances. Please dispose
your old appliances using appropriate collection systems.
Subject to technical modifications!
