11
12
a
1
2
3
1
2
3
4
Installation
( )
3
Installation
Installation
Installation
Installation
( )
4
Installation
Step 8. After the Assembly
After the assembly, please operate the
chair in this order:
Plug the cable line in the hole a on the
power box as shown in the right picture.
Hole a connect with one end of cable line
.
Insert the plug of cable line into the socket.
Switch on.(Switch on/off "O/I", press I down
to turn it on.)
Enjoy the massage by using the remote
control
.
Make sure the switch is off before you
insert the plug of cable line into the
socket.
①
Take out the seat side airbag,make the side which with zipper face to the seat
,
make the two
cylindrical pin align to the two hole on the seat frame
,
then press down straightly
,
make
sure the
connection
tightly
.②
Connect air pipe on airbag with air tap behind the seat around airbag zip,
make sure it is tight.
安装手控器和支架：将手控器支架插到右扶手的扶手与气囊之间。最后把手控器插入手控器座中。
Back seat cushion
connect to upper
backrest
by
zipper
Connect the pillow
to the backrest
by velcro
Back seat cushion
connect to the two
sides of backrest
by zipper
▲
Back seat cushion
zipper connect to
seat,connect the
velcros between
them
.
Installation of back
seat cushion should
pay attention to:
make the middle
part of back cushion
align to the middle
part of backrest
Connect air pipe on
airbag with air tap
behind the seat
around airbag zip
①
②
③
④
▲
6
0
②
①
Step 7 Assemble left/right shoulder parts
.
Assemble left part onto the left side of the backrest, right part onto the right side of the backrest.
①
Attach the shoulder part to the backrest side,
②
Match the shaft to the hole on the side panel
of the backrest, and match the two screw holes with the two step screws on the side of the
backrest, insert the shoulder part onto the side of the backrest tightly.
④
Same way to assemble
the other shoulder part.
meanwhile, rotate the shoulder part upward to disassemble the shoulder part.
Disassemble shoulder parts: Press down the hidden button at the back of the shoulder part,
M8 step screws and rotation holes on the
shoulder parts.
M8 step screws and screw screw rotating
holes on the shoulder parts.
Revolving shaft on the shoulder part and
corresponding holes on the backrest.
air nozzle on the seat frame
2pcs pin hole on
the seat frame
2pcs cylindrical
pins
Side air bags of seat
Step 5.
Installation of the side air bags of seat, remote control and controller holder
Step 6. Put the back
Cushion, head pad onto the backrest and
connect the two parts with zipper and velcro.
Warm tips
In order to get exact correct body test data for comfortable
massage effect, when you sit on the chair, please make the bottom rim
of the head pad flush with your ears before zippering the said two parts.
Back seat cushion
Head pad
Zipper position on
the back cushion
Backrest
Head pad
Back seat cushion
③
Hidden button
(the hidden button is located
as picture showed, near zipper)
Controller holder insert
on the inside of right
armrest
Remote control
Air tube
Zero
OK
On/Off
Quick
relaxation
Emergency
off
Menu
Auto
