10
®
All drawings are for illustrative purposes only.
INSTALLATION, OPERATION, & MAINTENANCE
ChromaSteam
®
X
INSTALLER
INSTALLATION, OPERATION, & MAINTENANCE
ChromaSteam
®
X
Connecting the ChromaSteamX
Fixture to the ChromaSteamX Control Box
Connecting LED
Power Cable
Figure 15
•
Shock Hazard.
Ensure that power is turned off
during installation. Turn off power at breaker
panel.
•
Shock Hazard.
To prevent electric shock, do
not remove the screws on the back of the
control box. No user-serviceable parts inside.
Refer servicing to qualified service personnel
only.
At this point in the installation:
• Each of the LED cluster’s pigtail has been
connected to one end of the 30-foot LED power
cable (see page 9), and the other end has been
routed through conduit so that it is located for
connection to the control box.
1.
Connect the free end of the LED power cable(s)
to any of the ports labeled Chroma1 through
Chroma4
(Figure 15)