Feel Good mr.steam Basic Butler, Инструкция по установке, эксплуатации и обслуживанию, Страница: 10 / 34

mr
.
steam
®
Installation & Operating Instructions
_________________________________________________________________
9
The iTempo Control features programmable
digital temperature control, a fixed (60) minute
set at a temperature range from 80˚
F
up to 120˚
F
Set the steam bathing temperature
according to personal preference, however it is
highly recommended to begin steam bathing at a
low temperature setting for a very short
duration to gauge comfort and safety levels.
ON/OFF Diagram 1
of steam. Steam will begin to flow a few minutes
after the control is turned ON. The duration re
-
quired for the steam room to reach steam
bathing temperatures depends on the steam
room construction and steam generator specifica -
tions. Steam may continue to flow for a short time
after the control is turned OFF.
PA US E FEAT URE Diagram 2
If a pause in steam flow is desired press the
PAUSE key. The display will flash while the
control is in the PAUSE mode. The timer will
continue to countdown while in the PAUSE
mode. Steam may continue to flow for a short
time after pause is pressed.
DIA GRAM 1
DIA GRAM 2
iTempo
®
Operating Instructions
Drawings for Illustrative Purposes Only.
W AR N ING
!