www.smartpetfeeder.ca
connecting feeder
4.
Pairing feeder to WiFi network:
- Find and connect your smartphone to “SmartLife-XXXX” network.
There will be numbers instead of “XXXX”.
- Connect to this network and wait up to 5 seconds until you see “Connected without
Internet” status. Go back using “<” arrow in the top left corner of the app. You can also
use “Back” button if you’re using an Android device.
- Wait up to 1 minute until Smart Pet Feeder will be paired with your WiFi network
and initialized.
You can find detailed step-by-step Video Guides at our YouTube channel.
Search for “FEED’EM Canada” in YouTube search bar.
5.
Troubleshooting:
If for any reason your device won’t connect, follow these steps:
- Restore Smart Pet Feeder 2.0 to its factory settings. Press and hold the SET button
for 5-7 seconds until you hear the “ding-dong” sound or green light will start flashing.
- Retry the connection process. Make sure that you’re entering the correct WiFi password.
It is case sensitive so give attention to uppercase letters.
If it still won’t connect, contact our support team:
