FEATURES
SERVICE PARTS
A: Base
B: Swivel Bracket Assembly
C: Mast Assembly
D: Wheel Adapter
E: Indicator Assembly
F: Z-knob with Indicator Tip
G: Indicator Lock Nut
(B) #16523: Swivel Bracket Kit
(D) #16891: Wheel Adapter
(E) #16797: Indicator Assembly
(F) #16814: Z-knob with Indicator Tip
SET UP_STEP 2_INSTALL THE MAST TO BASE
SET UP_STEP 1_ INSTALL THE MAST TO BASE (UNBOXING)
2. Adjust Mast Assembly (C) angle as needed. (FIG.3)
3. Tighten the Swivel bracket Assembly (B) Z knob.
4. If using the wheels quick release axle, skip to
‘FUNCTIONALITY_ TRUING INDICATORS’.
1. Remove Mast Assembly (C) and flip 180 degrees. (FIG.1)
2. Slide the Mast Assembly (C) over the Base (A). (FIG.2)
For additional product information visit: www.Feedbacksports.com
C
D
C
FIG. 3
A
C
F
G
E
D
B
SET UP_STEP 3_INSTALL THE WHEEL ADAPTER
1. Slide the Wheel Adapter (D) into the Mast Assembly (C).
2. Align the notch of the Wheel Adapter with the slot on the Mast.
(FIG. 2)
3. Tighten the Wheel Adapter’s (D) Z-knob.
FUNCTIONALITY_PLACING WHEEL ON STAND
FUNCTIONALITY_ TRUING INDICATORS
FUNCTIONALITY_ MODULAR
Rotor indicator
Disc truing slot
Lateral indicator
Spring tip indicator
Radial indicator
Check wheel hop
FIG. 2
FIG. 4
1. Remove conical wheel support.
2. Place the wheel over the Wheel Adapter (D).
3. Tighten the conical wheel support against the wheel. Ensure the
wheel is centered on both conical supports. (FIG.4)
1. Position Indicator Assembly (E) as needed.
2. Tighten Indicator Lock Nut (G)
Secures to the top of all Feedback Sports upright repair stands.
G
E
D
A
A
C
B
FIG. 1
FIG. 2
